Tube Plate Welding YXAWST-200L

1.Welding Seam Tracker ensures high quality/efficiency of welding seam. 2. Control torch move along welding direction in time

 Functions

Welding Seam Tracker can control welding torch move along welding seam direction strictly, thus saving cost, improving welding efficiency, ensuring machining precision, and achieving good internal quality and nice appearance, when the welding seam is long, not straight, or spiral.

 

YXAWST-200L

Instructions

- The Laser Seam Tracker consists of a precision laser sensor, controller and slide. The sensor does probe the weld seam and the controller does control the change value on the work-piece. The welding torch is guided rapidly and exactly by moving the slides.

- Non-contact laser sensor makes detect position nearer to welding point, thereby dramatically reduce tracking delay and have a higher tracking accuracy.

- The Seam Tracker can calibrate the error caused by the work-piece deformed itself and the welding heat.

- The electric motors have dual-production under overcurrent and overvoltage, which can improve motor performance and life;

- Dustproof design can effectively prevent tracker inside from welding spatter and dust;

- Source voltage inputted at wide range, which is suitable for various countries;

- The Seam Tracker can be compatible used with other automatic system or unmanned system.

Features

-- The differences among YXAWST-100L, 150L, and 200L Laser Welding Seam Trackers are Rated Loading Capacity and Welding Application as below specification.

-- The Seam Tracker has the function for sensing the track welding.

-- Support near/remote operating.

-- Several ways of enter into welding seam.

-- There is the function to make the time of weld end programmed because the tracker can sense the edge of work-piece.

-- Double-model control in manual and automatic.

-- The tracker has the right/left reverse function for easy installation and change welding direction.

-- The tracker can effectively identify and filter the welding spatter.

Specification

Model	YXAWST-200L
Rated Loading Capacity	100kg
Tacking Range	200mm
Maximum Tracking Speed	300mm/min
Accuracy	±0.2mm
Application Welding	SUBMERGED TANDEM
Driving Motor	High-Quality DC Motor
Driving Method	Motor Drive→Reducer→Ball Screw→Seam Tracker
Input Power	AC100~240V Single-Phase,50/60HZ,2A
Standard Configuration	Controller + X/Y Sliding Plate + Sensor + Sensor Adjust + Connecting Cables
Accessories Option	Remote Control Box

Remark: We can also make seam tracker in special specification for user demands.

 

Tube Plate Welding YXAWST-200L